Palisade Fence System com perfis D & W para perímetros seguros

Palisade fencing is manufactured in two standard profiles:

• 'D' Profile – Flat-fronted design offering excellent rigidity and cost efficiency
• 'W' Profile – Ribbed profile providing enhanced strength and higher security

Both profiles are available in multiple thickness options, allowing flexibility in design and security level selection.

Three pale profiles

Four pale head designs

Standard posts are manufactured from 100 × 55 RSJ sections. For higher security installations, 127 × 76 UB posts are available.

Posts can also be manufactured with:

• Base plates for surface mounting
• Wall-fixing posts
• Extensions for barbed wire or razor wire
• Cranked extensions for wall-top installations
• Bespoke designs to meet specific site requirements

Components of a palisade fence

Pointed pales

Two secure fixing systems are available:

• Rivets and collars (M6 / M8) – Installed using a fencing rivet gun
• M8 bolts with Permacone fixings – Designed to snap off during installation for tamper-resistant security

Straight Palisade Fishplates

Corner Palisade Fishplates

End Palisade Fishplates

Anti-vandal Bolts and Nuts

Palisade gates, designed to match palisade fencing, are used to secure access points to your premises and properties. Manufactured from heavy-duty steel, the palisade gates we supply are durable and capable of withstanding harsh conditions and potential impact.

We supply two types of palisade gates:

• Palisade Swing Gates
• Palisade Sliding Gates

Palisade Swing Gates

Palisade swing gates operate via hinged bearings to ensure smooth and reliable movement. They are available in heights ranging from 1.2 m to 3.0 m, and can be supplied as single-leaf or double-leaf configurations, as shown in the following images.

Pedestrian Gate - Single Leaf

• Height: 1.2 m, 1.8 m, 2.0 m, 2.4 m or 3.0 m.
• Length: 1 m, 1.2 m or 1.5 m.
• Gate leaf: one gate leaf.
• Palisade pales: W section, D section or angle pales.
• Gate post: 2 RSJ posts or square posts.
• Latch: one heavy duty slide latch.
• Horizontal palisade rails: 2 angle steel.
• Fittings:2 hinges, some bots and nuts.

Vehicle Gate - Double Leaves

• Height: 1.2 m, 1.8 m, 2.0 m, 2.4 m or 3.0 m.
• Length: 2 m, 3 m, 4 m, 5 m or 6 m.
• Gate leaf: two gate leaves.
• Palisade pales: W section, D section or angle pales.
• Gate post: 2 heavy duty square post or RSJ post.
• Latch: 1 heavy duty slide latch.
• Horizontal palisade rails: 2 angle steel.
• Fittings: 4 hinges, and correct numbers of bots and nuts.

Palisade Sliding Gates

Palisade sliding gates are widely used for securing commercial and industrial premises. Manufactured for high durability, they provide excellent vandal resistance and high security.

Compared with swing gates, sliding gates require minimal opening clearance and slide neatly behind adjacent palisade fencing, making them ideal for heavy-duty applications.

Palisade Sliding Gate

• Height: 1.2 m, 1.8 m, 2.0 m, 2.4 m or 3.0 m.
• Length: 4 m, 5 m, 6 m, 7 m, 8 m, 9 m, 10 m, 11 m, 12 m, 13 m,14 m, 15 m or other widths as your request.
• leaf: one gate leaf.
• Palisade pales: W, D section or angle pales.
• Wheel: 2 gate wheel with a diameter of 100mm.
• Wheel run track: 10mm to 15mm protruding from the ground surface.
• End post: 120mm × 120mm.
• Center post: 100mm × 100mm.
• Fitting: post clamps, bolts and nuts.