3D Mesh Panel with Thick EPS Core for wall Construction

• 3D welded wire mesh.
  • Wire diameter: 12 gauge.
  • Panel thickness: 2" or 3".
  • Panel size: 48" × 96".
  • Finish: electric galvanized (not powder coated).
  • Frame: 1/2" × 1/2" and 12 gauge galvanized angle.
• 3D mesh panel.
  • Wire diameter: 3.0 mm.
  • Mesh opening: 50 × 50 mm.
  • Truss wire material: galvanized.
  • Panel size: length 2400 mm × width 1200 mm.
  • EPS insulation core: 50 mm and 75 mm.
• 3D panel for wall.
  • Panel size: 1200 mm × 3000 mm (factory made standard size).
  • GI wires thickness: 3 mm for load bearing structure.
  • EPS thickness: 100 mm or 50 mm.
  • Connecting GI wire diameter: 3 mm.
  • Grid size of GI wire mesh: 50 mm × 50 mm.
  • Gap between GI wire mesh and EPS: minimum 12 mm and maximum 20 mm.
  • GI wire coating: minimum 40 gsm.
  • Additional information: it should be hot dip and have 350 DPN Hardness, it should pass salt water dip test (i.e. no corrosion in salt water test), EPS material (i.e., thermal/acoustic insulation) should be of min 16 kg/m3 +/-5% density, it should also be self extinguishable.

3D panel: two sheets of welded wire mesh panel are joined together.
3D panel with interlayer.