3D Panel with EPS Core 50 mm or 100 mm

Besides common welded wire mesh, we also manufacture 3D panels for construction. Here is the requirement of 3D panel system from a construction company which has done couple of projects using 3D panels. The panel specification given below.

Items 01

  • 3D panel specification:
    • 50 mm thick polystyrene.
    • Length 2.4 mtr.
    • Width 1.2 mtr.
    • Thickness 75 mm +/- 2 mm.
  • Wire specification
    • Wire 2 mm diameter.
    • Cross wire (inserted wire) 2.5 mm diameter.
    • Insertion of wire @ 100 mm.

Items 02

  • 3D panel specification:
    • 100 mm thick polystyrene.
    • Length 2.4 mtr.
    • Width 1.2 mtr.
    • Thickness 114 mm +/- 2 mm.
  • Wire specification
    • Wire (made of Electric galvanized low carbon wire, through secondary cold pull) 2 mm diameter.
    • Cross wire (inserted wire) 2.5 mm diameter.
    • Insertion of wire @ 100 mm.

Items 3
3D wire mesh panel

  • 2.8 mm galvanized or non galvanized.
  • Mesh opening (mm): 100 × 100.
  • Truss wire: 2 galvanized or non galvanized.
  • Panel width: 1220 mm.
  • Panel length 3000 mm.
  • Panel thickness: 50 mm, 80 mm.
  • EPS Insulation Core: 50 mm.

Items 4
3D panel specifications

  • Wire to be galvanised.
  • Welded wire dia: 2.1 mm.
  • Opening: 50 × 50 mm.
  • EPS core: 50 mm.
  • Inserting wire: 2.5 mm.
  • Length: 3 m.
  • Width: 1.2 m.
A 3D wire mesh panel with EPS core.
3D panel with square mesh opening 50 mm.