H.D.G. Fence Panel & Concertina Razor Wire

  • Fence panel.
    • Wire diameter: 4.0 mm.
    • Opening size: 12.5 mm × 75 mm.
    • Panel size: height 2650 mm × width 2100 mm.
    • Surface treatment: heavy hot dipped galvanized.
    • Wire tensile strength: 83000 PSI or 572 MPa.
  • Panel frame.
    • Angle steel bar: 60 × 60 × 6 mm.
    • Welded frame: height 2650 mm × width 2100 mm.
    • Steel plate (pre-drilled, heavy hot dipped galvanized): 8 × 50 × 60.
  • Steel bar - pre-drilled, heavy hot dipped galvanized.
    • Vertical steel bar: 30 × 4 × 2650 mm.
    • Horizontal steel bar: 30 × 4 × 2100 mm.
  • Y post.
    • Y cranck arm: 60 × 60 × 6 mm.
    • Arm height: 355 mm, welded on top of main post.
    • Pre-drilled, hot dipped galvanized pipe: 3" SCH 40, length 3000 mm.
    • Pre-drilled, heavy hot dipped galvanized cap plate 6 mm on top.
  • Concertina razor wire.
    • Blade type: BTO-22.
    • Finish: hot dipped galvanized.
    • Outside diameter: 400 mm, with steel clips and 11.5 m per roll.
    • Hot dipped galvanized round bar, bar diameter: 12 mm, bar length: 150 mm.
  • Double leaf swing gate.
    • Post pipe: 6" sch 40, height: 4.15 m, width: 6 m.
    • Frame: 60 × 60 × 6 mm.
    • Mesh counts: 385 mesh.
    • Panel finish: heavy hot dipped galvanized.
  • Accessories
    • Tie wire: hot dipped galvanized, 2 mm wire diameter.
    • Tension wire, hot dipped galvanized, 4 mm wire diameter, 10800 m.
    • Screw-1: M8 × 30 mm for fixed panel onto frame.
    • Screw-2: M16 × 50 mm for fixed panel frame onto the post.
A large piece of ground is surrounded by welded mesh fence with concertina razor wire on top through Y post.
Welded mesh fence with concertina razor wire as security fence.