Hot Dip Galvanized BS 729 Pressure Welded Mesh Panels for Flooring

Panel, flooring item 1

• Type, design: open, fully banded.
• Mat of construction: steel.
• Mat spec: BS 4360 grade 43A.
• Manufacturing process: pressure welded, hot dip galvanized to BS 729.
• Type, transverse bars: wrenched.
• Size, transverse bars: 6 mm.
• Size, load-bearing bars: 30 × 3 mm.
• Mesh width: 30 × 90 mm.
• Bounded margin bar: 30 × 3 mm.
• Size, panel: 1000 × 1100 mm.

Panel, flooring item 2

• Type, design: open, fully banded.
• Mat of construction: steel.
• Mat spec: BS 4360 grade 43A.
• Manufacturing process: pressure welded, hot dip galvanized to BS 729.
• Type, transverse bars: wrenched.
• Size, transverse bars: 6 mm.
• Size, load-bearing bars: 30 × 3 mm.
• Mesh width: 30 × 90 mm.
• Bounded margin bar: 30 × 3 mm.
• Size, panel: 1400 × 930 mm.

Panel, flooring item 3

• Type, design: open, fully banded.
• Mat of construction: steel.
• Mat spec: BS 4360 grade 43A.
• Manufacturing process: pressure welded, hot dip galvanized to BS 729.
• Type, transverse bars: wrenched.
• Size, transverse bars: 6 mm.
• Size, load-bearing bars: 30 × 3 mm.
• Mesh width: 30 × 90 mm.
• Bounded margin bar: 30 × 3 mm.
• size, panel: 3200 × 1000 mm.

Panel, flooring item 4

• Type, design: open, fully banded.
• Mat of construction: steel.
• Mat spec: BS 4360 grade 43A.
• Manufacturing process: pressure welded, hot dip galvanized to BS 729.
• Type, transverse bars: wrenched.
• Size, transverse bars: 6 mm.
• Size, load-bearing bars: 30 × 3 mm.
• Mesh width: 30 × 90 mm.
• Bounded margin bar: 30 × 3 mm.
• size, panel: 1500 × 930 mm.

Panel, flooring

• Type, design: open, fully banded.
• Mat of construction: steel.
• Mat spec: BS 4360 grade 43A.
• Manufacturing process: pressure welded, hot dip galvanized to BS 729.
• Type, transverse bars: wrenched.
• Size, transverse bars: 6 mm.
• Size, load-bearing bars: 30 × 3 mm.
• Mesh width: 30 × 90 mm.
• Bounded margin bar: 30 × 3 mm.
• size, panel: 1800 × 1000 mm.

Panel, flooring item 5

• Type, design: open, fully banded.
• Mat of construction: steel.
• Mat spec: BS 4360 grade 43A.
• Manufacturing process: pressure welded, hot dip galvanized to BS 729.
• Type, transverse bars: wrenched.
• Size, transverse bars: 6 mm.
• Size, load-bearing bars: 30 × 3 mm.
• Mesh width: 30 × 90 mm.
• Bounded margin bar: 30 × 3 mm.
• Size, panel: 2500 × 1000 mm.

Hot dip galvanized welded mesh flooring panels